Moving The Outdoor Unit; When Moving With A Crane; When Moving With A Forklift; When Moving Product Without Wooden Pallet And Crane Is Not Available - Samsung DVM S Series Installation Manual

Moving the outdoor unit

Select the moving path in advance.
Be sure that moving path can support weight of the outdoor unit.
Do not slant the product more than 30˚ when carrying it. (Do not lay the product down in sideways.)
Surface of the heat exchanger is sharp. Be careful not to get injured while moving the product.
• You must use certain part of the product when moving the product.
CAUTION

When moving with a crane

Fasten the wire rope as shown in the figure.
To protect damage or scratches, insert a piece of cloth between the
outdoor unit and the wire rope.

When moving with a forklift

Carefully insert the forklift forks into the forklift holes at the bottom of
the outdoor unit.
Be careful with the forklift from damaging the product.
When moving the product without wooden pallet and the crane is not available for use
Connect a wire rope to the outdoor unit as you would move it with a
crane.
Hang the wire rope to the forklift fork to move the outdoor unit.
Wire rope
Holes for wire rope
to go through
Forklift
Holes for forklift
forks to go through
Forklift
Wire rope
Forklift holes
17