Moving The Outdoor Unit - Samsung DVM S ECO AM XMDG Series Installation Manual

Moving the outdoor unit

f X Select the moving path in advance.
f X Be sure that moving path can support weight of the outdoor unit.
f X
Do not slant the product more than 30˚ when carrying it. (Do not lay the product down in sideways.)
f X
Surface of the heat exchanger is sharp. Be careful not to get injured while moving the product.
• You must use certain part of the product when moving the product.
Caution
1)When moving with a crane
f X
Fasten the wire rope as shown in the figure.
f X To protect damage or scratches, insert a piece of cloth between the
outdoor unit and the wire rope.
2) When moving with a forklift
f X Carefully insert the forklift forks into the forklift holes at the bottom
of the outdoor unit.
f X
Be careful with the forklift from damaging the product.
3) When moving the product without wooden pallet and the crane
is not available for use
f X
Connect a wire rope to the outdoor unit as you would move it with a
crane.
f X
Hang the wire rope to the forklift fork to move the outdoor unit.
Wire rope
Wooden pallet
13