Maintaining & Configuring The Touchscreen Device; Reboot The Touchscreen; Understanding And Configuring Screen Brightness & Screen Dimming - iControl Technicolor TCA200 User Manual

Maintaining & Configuring the TouchScreen Device
You can configure the way the TouchScreen device displays your security information.

Reboot the TouchScreen

Occasionally, a problem might arise that could be solved by rebooting the TouchScreen.
To turn the TouchScreen off and on:
1. From the Settings menu (see
Reboot Touchscreen.
The Reboot TouchScreen screen is displayed.
2. Tap Reboot TouchScreen.
The TouchScreen turns itself off and back on.
Understanding and Configuring Screen Brightness & Screen Dimming
There are several options for configuring the TouchScreen's screen brightness:
Set the default brightness level of the TouchScreen from level 10 (the brightest and the default set-
ting) to level 1 (the dimmest). See page
Have the screen dim automatically to a preconfigured setting after a configured period of inactivity
(see page 78
Have the screen and the TouchScreen LEDs dim completely automatically each day at a set time,
and then brighten at a set time (see page 79). This is called Night Mode.
Note: The Night Mode screen brightness setting is not the same as Arm Night Mode as
described on page 30.
To manually place the TouchScreen in Night Mode:
Press the Night Mode button, which located on the right side of the TouchScreen. When a user touches
the screen, it brightens to the default brightness level.
Maintaining & Configuring the TouchScreen Device
"Configuring the TouchScreen" on page
78
13), tap Advanced Settings >
77