iControl Technicolor TCA200 User Manual page 43

Table 5: Keypad Code Permission Levels
Arming
Description
Level
Guest User can arm and disarm the system.
Arm User can only arm the system.
Only
Standard User can create, edit, and delete keypad codes, as well as arm and disarm the system. This
level is provided with the system and cannot be added.
Duress User is granted full access to the TouchScreen including arming/disarming and system set-
tings. If entered, the TouchScreen sends a silent alarm to the central monitoring station, and
the police are dispatched. This level is provided with the system and cannot be added.
To modify a keypad code:
1. From the Manage Keypad Codes screen, tap Edit.
The Edit Keypad Code screen is displayed.
Note: You cannot change the Permissions level of a keypad code.
Understanding the Duress Keypad Code
The Duress keypad code is used to if an intruder forces you to arm/disarm your system or access your
security settings. Rather than entering your keypad code, enter the Duress keypad code. When you do
this, you will be granted full access to your TouchScreen, but a silent alarm is immediately sent to the
central monitoring station and police are dispatched.
By default, the Duress Code is disabled.
To enable and manage your Duress keypad code:
1. From the Settings menu (see
Keypad Codes
The Manage Keypad Codes screen is displayed.
From this screen you can modify your keypad codes or add new ones.
"Configuring the TouchScreen" on page
Managing Your System Security
13), tap Security > Manage
43