iControl Technicolor TCA200 User Manual page 10

TouchScreen User Guide
The following table describes the equipment that may be included with your security system.
Security
Network Router
TouchScreen
Sensors
Cameras
Panel interface
Thermostats
Lights
Wi-Fi Repeater
Siren Repeater
10
Table 1: Security Network Components
Description
This is the hub of your security network. This device is installed
between your broadband modem and your home network
router.
The device used to interface with your security system.
Multiple types of sensors are available:
Doorway/window sensors monitor the opening and clos-
ing of potential entry and exit points.
Motion detectors monitor movement within the prem-
ises.
Carbon monoxide sensors trigger if carbon monoxide is
detected.
Flood sensors trigger if water comes in contact with the
sensor.
Glassbreak sensors trigger if a window is broken.
Smoke detectors trigger when smoke is detected.
Up to six cameras can be installed in your security system.
Cameras can be configured to take a series of pictures if a
particular sensor is faulted.
This device connects to a traditional home security system and
allows you to control its components from the TouchScreen.
This device is used to remotely control the indoor temperature of
the premises.
These devices can be remotely controlled using the security
system.
This device extends the range of the security network router to
connect to devices that require Wi-Fi connectivity.
This device is used to connect to sensors and devices that require
RF connectivity. It also functions as a siren.