Initial Operation; Checkpoints Of Safety - Blastrac BMS-220 ADB Operating Manual

Before using the machine it is essential to inspect the machine every day.
It is not permitted to use the machine if the machine safety is not according the checkpoints below.
Checkpoints of electrical safety:
Check if the power supply cable of the charger is unplugged and the cable is stored into the machine.

Any damage to electric cables is not permitted

Checkpoints of machine safety:
Check if:
Control levers should be in neutral position .

All hydraulic hose connections are tightened and there is no leakage of oil.

The safety functions and operating functions work correct.

There are not any loose nuts or bolts.


4. Initial operation

9