Maintenance - Blastrac BMS-220 ADB Operating Manual

Pay attention to Chapter 3 "Safety" during maintenance and repair works.
Failures due to inadequate or incorrect maintenance may generate very high repair costs and long standstill
periods of the dust collector. Regular maintenance therefore is imperative.
Operational safety and service life of the stripper depend, among other things, on proper maintenance.
The following table shows recommendations about time, inspection and maintenance for the normal use of the
stripper.
12 h after repairing
Daily and prior to
starting work
Annually
The time indications are based on uninterrupted operation. When the indicated number of working hours is not
achieved during the corresponding period, the period can be extended. However a full overhaul must be carried
out at least once a year.
Due to different working conditions it can't be foreseen how frequently inspections for wear check's, inspection,
maintenance and repair works ought to be carried out. Prepare a suitable inspection schedule considering your
own working conditions and experience.
Our specialists will be happy to assist you with more advice.
Further is advised:
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motors from moisture,
heat, dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is expired when:
Non original Blastrac parts have been used

Repair work is not done by qualified Blastrac personnel

Changes, add one's or conversions are undertaken without written permission of Blastrac USA


6. Maintenance

TECHNICAL DATA
Check all accessible screw connections for tight seat.
Check all safety devices working adequate.
Check the function of the residual current operated device.
Check the hose connections for tightness and fixed seat.
Check the electric connections for sediments of dirt or foreign bodies.
Check the electric motors for dirt and other contaminants.
Full overhaul and cleaning of the complete machine.
17