Safety; Safety Precautions - General - Blastrac BMS-220 ADB Operating Manual

It is important that all persons who are working with or maintaining this machine must read the manual
carefully and understand it fully.
Keep this manual always with the machine, to enable it to be referred to at any time
Make sure that persons who are not operating the machine are not in the surrounding area of 5 meter

of the machine.
Make sure that there is nothing standing or situated on the surface to be treated

Make sure that there are no cables or hoses in the driving direction of the machine.

Always drive backwards when driving up to a ramp or grade, and forwards when driving of the ramp.

Don't get disturbed during the activities.

Safety regulations
Never change anything from the safety devices on the machine!

Persons who are not operating the machine must not be permitted to stay in the surrounding area of 5

meter of the machine.
Don't change anything on the machine. Always use cables for charger which are approved and safety

earthed, including extension cables. The charger is always equipped with an earthed connection, do
not change this and use always earthed cables with an earthed plug.
Connect the main power supply cable of charger to an installation with an earth leakage circuit

breaker.
Inspect and test the electrical components regularly. The electrical components have to satisfy to the

requirements which apply to these components.
Always call a skilled electrician or your distributor when you have questions about the safety of the

electrical components.
Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or

by trained persons under the guidance and supervision of a skilled electrician as well as in accordance
with the electrical engineering regulations.
Pull out the main plug of the charger and the electrical panel during inspections and repairing on the

machine.
The following sticker is placed on the machine.
Meanings of these symbols are:
Ear protection is obliged

Safety glasses with lateral protection are obliged

CE-mark on this machine

Safety shoes obliged

Consult the manual before operating the machine

Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Wear gloves and dust mask during operating the machine.

3. Safety

Safety precautions
6