Hotkey Summary - Monoprice 38295 User Manual

HOTKEY SUMMARY

In order to function, hotkeys in the following table must be prefaced
with the Hotkey Prefix. By default the Hotkey Prefix is:
By pressing and holding the Remote Port Selector for 3 seconds, you can
swap the Hotkey Prefix between the default and the following:
Note that the following key names in the Hotkey Combination column
are enclosed in brackets. The brackets should not be typed.
Hotkey
Combination
[Enter]
[k] [Enter]
[s] [Enter]
[a] [Enter]
[a] [Enter] [n]
[Scroll Lock] [Scroll Lock]
[Ctrl] [Ctrl]
Toggles the KVM and Audio focus between the
two computers. Note that if the KVM and Audio
focus are on different computers, only the KVM
focus switches.
Toggles the KVM focus only.
Toggles the Audio focus only. Note that this
function requires the use of external
headphones/speakers.
Starts Auto Scan. The KVM focus cycles from
computer to computer at the default 5 second
scan interval. To exit Auto Scan, press [Esc] or
[Spacebar].
Starts Auto Scan. The KVM focus cycles from
computer to computer an n second intervals.
Replace n with a number between 1-4, where
1=3 seconds, 2=5 seconds (default), 3=10
seconds, and 4=20 seconds. To exit Auto Scan,
press [Esc] or [Spacebar].
11
Function