Komatsu PC130-8 Shop Manual page 899

50 Disassembly and assembly
2) Install eyebolts [8] to ports (k) and install
cover (14) to hub (1) while matching the
bolt holes.
3) Tighten hexagonal socket head bolts (35).
2
Mounting bolt: Adhesive (LOC-
TITE No. 242 or equivalent)
3
Mounting bolt:
66.7 ± 3.92 Nm {6.8 ± 0.4 kgm}
21. Adding oil
1) Add oil through oil filler port (j).
5
Final drive case: 2.1 l
PC130-8
2) Tighten three plugs (30).
3
Plug (30):
98.1 ± 19.6 Nm {10.0 ± 2.0 kgm}
22. Removal of travel motor
1) Turn over the travel motor assembly to set
the travel motor side up.
2) Remove the mounting bolts of the travel
motor from work stand [1]. (See "Compo-
nent parts")
3) Install eyebolts [8] to the threaded holes of
spindle (2) and lift off the travel motor
assembly.
4
Travel motor assembly: 150 kg
SEN04128-01
39