50 Disassembly and assembly
13. Remove plate (17).
14. Remove lock pin (18) and duct (19).
15. Remove ducts (20) and (21).
a Cut the cable tie.
PC130-8
16. Remove ducts (22) and (23).
a Cut the cable tie.
17. Remove upper and lower ducts (24).
18. Remove upper and lower ducts (25).
19. Disconnect plate (26) from the cab wall.
20. Disconnect connectors N10 (27) and AC01
(28).
21. Disconnect connectors ECU10 and ECU11
(29) from air conditioner controller (ACCONT).
22. Loosen cable tie (30) and draw in wiring har-
ness (31).
SEN04134-00
5