Table of Contents
Advertisement
50 Disassembly and assembly
4)
Securely hold lower grip (4) by left hand
and upper grip (5) by right hand, and
slowly push down them forward.
a Check that the bottom of the front
window does not touch the wiper arm.
5)
When the bottom of the front window
reaches the top of lower window, push the
top of the front window to front lock
catches (36) and engage the lock.
PC130-8
6)
Check that lever (3) is securely at LOCK
position.
a Check that the arrow on lock case (7)
is aligned with that of lever (3).
7)
Turn battery disconnect switch to ON posi-
tion.
8)
Check that the work equipment lock lever
is in LOCK position and start the engine.
9)
Check the operation of the wiper arm with
the front window dried.
1]
Press the wiper switch (37) three
times continuously, and check that
the wiper arm (27) swings one round-
trip, and then is stored in the part (e)
of the R.H. stay.
SEN04132-01
31
Advertisement
Table of Contents
Troubleshooting
