50 Disassembly and assembly
16. Remove mounting bolts (32) (6 pieces) to
remove wiper motor assembly (33).
Installation
1.
Install wiper motor assembly (33).
2
Mounting bolt (32):
2.
Install packing (31) and washer (30), and
tighten nut (29).
a When installing washer (30), direct the
chamfered side toward the front of the
cab.
3
Nut (29):
10.8 to 12.7 Nm {1.10 to 1.30 kgm}
PC130-8
Liquid adhesive (LT-2)
3.
Install cap (28) and wiper arm (27).
a Install the wiper arm (27) so that the clear-
ance (a) between the washer nozzle (34)
and wiper blade (35), and overlap (d)
between the end surface (c) of the stopper
(41) and end surface (b) of the slider (43)
are the following dimensions.
q
Dimension (a): 22 mm
Dimension (b): 8mm
q
4.
Tighten nut (26) to close cap (25).
3
Nut (26):
11.8 to 15.7 Nm {1.20 to 1.60 kgm}
SEN04132-01
29