Removing The Antenna Module; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

NOTE: These instructions are applicable only for laptops with a non-touchscreen display.
1 Remove the base cover.
2 Remove the battery (half-length)
3 Remove the wireless card.
4 Remove the display assembly.
5 Remove the antenna cover.
Identifier
Status

Procedure

1 Peel the tape to access the antenna cables.
2 Remove the four screws (M2x4) that secure the antenna module to the display assembly.
3 Lift the antenna module off the display assembly.
GUID-A84F666A-38B4-4C77-A8DE-7910F5831300
Released

Removing the antenna module

computer. After working inside your computer, follow the instructions in
GUID-892244E2-6E72-43F7-B7E4-E161D5995363
Released
or the battery (full-length).
GUID-941A9399-CB90-4058-A802-7987DC7ECD57
Released
After working inside
www.dell.com/
Removing the antenna module
43
81