Removing The Power-Adapter Port; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the battery (half-length)
3 Remove the display assembly.
Identifier
Status

Procedure

1 Disconnect the power-adapter port cable from the system board.
2 Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3 Lift the power-adapter port along with its cable, off the palm-rest assembly.
GUID-35D5032D-9652-403C-9A8A-F98FFABA8776
Released

Removing the power-adapter port

computer. After working inside your computer, follow the instructions in
GUID-2FF28833-B61C-40FB-888B-254BA7578BCB
Released
or the battery (full-length).
GUID-A6D5FBD8-01B6-4CA4-987A-80FE336B8AF5
Released
After working inside
www.dell.com/
Removing the power-adapter port
39
75