Recommended Tools; Screw List - Dell XPS 15 Service Manual

CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting
cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and
connectors are correctly oriented and aligned.
CAUTION: Press and eject any installed card from the media-card reader.
Identifier
Status

Recommended tools

The procedures in this document may require the following tools:
• Phillips screwdriver #0
• Phillips screwdriver #1
• Torx #5 (T5) screwdriver
• Plastic scribe
Identifier
Status

Screw list

The following table provides the list of screws that are used for securing different components to the computer.
Table 1. Screw list
Component
Base cover
Base cover
Battery (half-length)
Battery (full-length)
Hard-drive cage
Solid-state drive (half-
length)
Solid-state drive
Solid-state drive (full-
length)
Speakers
GUID-1DA44488-D101-4AAE-BADD-2C0771F1C35F
Released
GUID-328DCC55-D98F-4173-A3DD-26BE2F041BF7
Released
Secured to
Palm-rest assembly
Palm-rest assembly
Palm-rest assembly
Palm-rest assembly
Hard-drive assembly
System board
Solid-state drive bracket
System board
Palm-rest assembly
Screw type
M2x3 T5
M2x8.5
M2x4
M2x4
M2x4
M2x3
M2x2
M2x3
M2x2
Quantity
10
2
4
7
4
1
1
1
4
Before working inside your computer
Screw image
9