Removing The Power-Button Module; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

NOTE: The fingerprint reader is available depending on the configuration ordered.
1 Remove the base cover.
2 Remove the battery (half-length)
3 Remove the memory modules.
4 Follow the procedure from step 1 to step 4 in
5 Remove the solid-state drive (half-length)
6 Remove the wireless card.
7 Remove the heat sink.
8 Remove the fans.
9 Remove the system-board
Identifier
Status

Procedure

1 Remove the two screws (M1.6x3) that secure the power-button module to the palm-rest assembly.
2 Lift the power-button module off the palm-rest assembly.
GUID-E31FD4D2-D7F5-4CA7-80D8-5A6CE8099F41
Released

Removing the power-button module

computer. After working inside your computer, follow the instructions in
GUID-280BCF63-F840-441D-9C1E-82A4D9DCC53D
Released
or the battery (full-length).
"Removing the hard
or the solid-state drive
assembly.
GUID-05B43FF3-D2EA-4E57-AD5F-B67D18EB5427
Released
drive".
(full-length).
Removing the power-button module
33
After working inside
www.dell.com/
65