Dab Radio Mode; Changing Dab Stations - Bush BD-1728 Instruction Manual

Using your Internet DAB Radio
Let's get started

DAB Radio mode

• Please make sure that the aerial is fully extended before you attempt to tune to a DAB
station (a vertical position is recommended). This will ensure that the maximum signal
strength is available when the radio begins to scan. Extending the aerial also ensures
the best possible sound quality.
• If you are not already in DAB mode, short press the Mode/info button until DAB is
highlighted, then short press the rotary Tune/Select control to go to DAB mode (check
the display).
• The first time you select DAB mode or if the station list is empty, your radio will
automatically begin to scan for DAB radio stations. A progress bar will show the
progress of the scan and the number of stations found during the scan will also be
displayed.
• If you were listening to a DAB station when you switched the radio off, then this station
will automatically be selected when you switch the radio back on.

Changing DAB stations

1. When the station list is displayed, use the rotary Tune/Select control to scroll through
the available stations. When the station that you would like to listen to is displayed,
short press the Tune/Select control.
2. If the station list is not currently displayed, long press the Menu/Info button to enter
the menu options. Station list is highlighted. Short press the rotary Tune/Select
control.
3. Use the rotary Tune/Select control to scroll through the available stations. When the
station that you would like to listen to is displayed, short press the Tune/Select control.
4. There will be a short delay whilst your radio tunes to your selected station.
34
Using your Internet DAB Radio