Connection; Initial Set-Up - Bush BD-1728 Instruction Manual

Getting to know your Internet DAB Radio
You'll be up and running in no time

Connection

1. Connect the mains power lead into the socket on the back of the Radio.
2. Plug the power adaptor into the mains power wall socket and
switch on. The Radio will switch on, the BUSH logo will be
displayed for a few seconds.
3. Please wait, the Setup wizard screen will then be displayed for
you to enter the settings required to connect to your home
router for WiFi internet Radio and MyMusic access.

Initial set-up

On first use your Radio will display the Setup wizard screen for you enter the settings
to connect to your home router for WiFi internet Radio and MyMusic access. We
recommend that you do proceed with this Setup and we have included the steps to do
this below.
Alternatively, if you would prefer to run the Setup wizard to connect to your router later,
use the rotary Tune/Select control to highlight 'NO' and short press to select. A further
screen will be presented to check if you would like to run the Setup wizard the next
time you power on your radio. Use the Tune/Select control to highlight YES or NO as
appropriate and short press the Tune/Select control. The main menu screen for your
radio will then be displayed.
Note: If at any point during the Setup wizard process, you wish to go back to change a
setting, just short press the Menu/Info. button.
1. The Setup wizard screen will be displayed, with the 'YES' option
highlighted, short press the Tune/Select control.
2. The Date/Time screen will be displayed, with the 24 hour option
already highlighted. Use the Tune/Select control to highlight the
time format that you would prefer for your radio and then short press the Tune/Select
control to select.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your Internet DAB Radio
Setup wizard
Start now?
YES NO
15