Table of Contents
Advertisement
Using your Stereo DAB/FM Radio
Let's get started
Telescopic aerial
Please make sure that the aerial is fully extended before you attempt to tune to a DAB
station (a vertical position is recommended). This will ensure that the maximum signal
strength is available when the radio begins to scan. Extending the aerial also ensures the
best possible sound quality.
DAB Radio mode
•
Check that your Radio is in DAB mode. If you are not already in DAB mode, short press
the Mode button until you are in DAB mode (check the display).
•
The first time you use the Radio or if the station list is empty, your radio will
automatically begin to scan for DAB radio stations. A progress bar will show the
progress of the scan and the number of stations found during the scan will also be
displayed.
•
If you were listening to a DAB station when you switched the radio off, then this station
will automatically be selected when you switch the radio back on.
Changing DAB stations
1. Turn the Tune/Select control to scroll through the available stations.
2. When the station that you would like to listen to is displayed, press the Tune/Select
control to select it. There will be a short delay whilst your radio tunes to your selected
station.
Scanning for DAB stations
With DAB radio additional stations and services regularly become available, so it's a good
idea to carry out a manual scan every now and then to make sure that you have the most
up to date station listing stored within the memory of your Radio. If you have moved your
Radio to another location, e.g.: if you go on holiday, then it's also a good idea to carry out
a manual scan.
22
Using your Stereo DAB/FM Radio with Bluetooth
Using your Stereo DAB/FM Radio
Let's get started
In DAB mode:
1. Short press the Scan button to begin a search for stations. The display will change
to 'Scanning...' . A progress bar will show the progress of the scan and the number of
stations found during the scan will also be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your area.
These are listed with a '?' prefix.
In DAB mode:
1. Long press the Menu button to enter the menu options.
2. Use the Tune/Select control to scroll to <Prune>. Press to Select.
3. Prune? Yes <No> is displayed. Use the Tune/Select control to scroll to Yes. Press
to Select and prune the station list. Stations with a '?' prefix will now no longer be
displayed.
Storing a DAB station preset
Your Radio can store up to 10 DAB radio stations in its preset memories for instant access
to your favourite stations.
Note: When you store DAB radio station presets, these do not overwrite your FM
station presets.
1. Tune the Radio to the DAB radio station that you wish to preset.
2. Long press the Preset button for approximately 2 seconds until Preset Store
<1:(Empty)> is displayed.
3. Use the Tune/Select control to move to the preset location that you would like to
store the radio station to (1-10).
Note: When you store a radio station to Preset location 1, 2 or 3, this will also be saved
under the number '1' , '2' and '3' buttons on the front of your radio.
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Stereo DAB/FM Radio with Bluetooth
23
Advertisement
Table of Contents
