Operating Instructions - Lincat CO133M Installation, Operating And Servicing Instructions

OPERATING INSTRUCTIONS

Only qualified or trained personnel should use this appliance.
MODELS CO133M, CO223M and CO235M
A- On/Off
B- Power supply indicator
C- Oven heating indicator
D- Temperature control knob
Connect the appliance to the electricity supply. The green neon (A) illuminates
indicating power to the appliance. Select the On/Off switch, the switch will illuminate
and the fan will start rotating.
Select the desired fan speed, slow or fast.
Set the thermostat to the desired temperature, the amber neon will indicate that the
unit is heating.
When at the set temperature the amber light will turn off and will alternate on or off
to maintain the set temperature.
Load products onto the shelves and if required set the timer.
When the set time expires the buzzer/lights will sound/flash.
Carefully open the door and remove the cooked products. Opening the door will
cancel the buzzer and flashing lights.
IS 731 ECN 4421
E- Fan Speed
F- 120 minute timer
G- Reset
H- Filter
F
E
G
H
Fig 3
Page 6 of 15
C
D
A
B