Cleaning; Servicing, Maintenance And Component Replacement - Lincat CO133M Installation, Operating And Servicing Instructions

Convector
Table of Contents

Advertisement

CLEANING

Your product has a manufacturer's warranty. This requires you maintain and care for
your product and follow maintenance instructions. If you fail to maintain your unit or
damage components Lincat may charge you for a warranty repair. Please check the
website for terms and conditions.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive materials.
Dry with a soft cloth.
Please refer to the Lincat website for the recommended cleaning products.
Avoid damaging the thermostat bulbs inside the oven when cleaning.
To assist cleaning remove shelf supports – see Servicing.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be
carried out by one of our recommended service engineers.
Regularly check the filter, see Fig 3 or 4, on the right hand side of the unit. It may be
cleaned in a dishwasher. Allow to fully dry before re-fitting.
Do not use the unit without the filter.
The door seal and bulbs are considered consumable parts and are not covered by
the warranty. The door seal on all units and the bulbs on the COxxxM units are
customer replaceable part. COxxxT bulbs require a screwdriver and disassembly of
the light housing to replace. Lincat recommend a qualified person undertakes this
operation.
IS 731 ECN 4421
Page 11 of 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Co223mCo133tCo235mCo223tCo235t

Table of Contents