Model ECO8 is fitted with a 3 pin plug for connection to a standard switched socket.
Model ECO9 must be connected by a qualified electrician (see power ratings).
The ECO9 electrical inlet (A) and water supply valve (B) are shown in Fig 2. The
ECO8 has the water supply valve on the opposite side. The water supply pressure
must be from 0.2-10 bar (20kPa-1,000kPa). Screw one end of the connection hose
to the back of the oven and the other to your water supply tap. Use the hose set
supplied with the appliance – old hose sets are not to be re-used.
Power Ratings
ECO8
ECO9
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
IS 331 ECN 3823
Fig 2
Page 5 of 12
3.0kW
7.5kW