Listening To An External Audio Device (Aux Mode); Listening To A Vinyl Record - Victrola BROOKLYN VSC-590BT Manual

Listening to an External Audio Device (AUX Mode)

Rotate Function Knob to select the "AUX" function.
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable
CD Player, etc.)
There is an AUX-IN jack on the front of the unit. When connecting a device that has a headphone jack, use
the cable with 3.5mm plugs on either end with the AUX-IN jack.
1. Plug one end of the AUX-IN cable (not included) into the AUX-IN jack.
2. Plug the other end of the cable into the headphone jack of the external audio source.
NOTE: All operations are only available on your external device.
1. Lift the buckles on both sides of the turntable and open the lid.
2. Rotate the Function Knob to select the "PHONO" function.
Note: Be careful not to pinch your finger when opening/closing the top cover.
3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
4. Select the appropriate speed (4).
5. Remove the tone arm-rest holder to release the tone arm.
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn.
7. When the record reaches the end, the tone arm will stop at the center of the record. Lift and return the
tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm.
Important:
- Always relock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntable cover.

Listening to a Vinyl Record