Wheel Removal - Honda CBR 250R Manual

WHEEL REMOVAL

Refer to the Safety Precautions on page 45.
This vehicle is equipped with a side stand
only. Therefore, if front or rear wheel
removal is required, it will be necessary to
raise the center of the vehicle with a jack or
other firm support. If none is available,
your nearest Honda dealer for this service.
(CBR250RAJ only)
When removing and installing the wheel,
be careful not to damage the wheel speed
sensor and pulser ring.
Front Wheel Removal
1. Support the vehicle securely and raise
the front wheel
using a safety stand or a hoist.
2. Remove the "Front Axle Nut" (1).
3. Loosen the "Axle Pinch Bolt" (2).
4. Remove the "Front Axle Shaft" (3), front
wheel and side collar.
Honda Motorcycle & Scooter India Pvt. Ltd.
visit
off the ground
(1) Front Axle Nut
(2) Axle Pinch Bolt
(3) Front Axle Shaft
(1)
(3)
(2)
61
CBR 250R