Honda CBR 250R Manual page 65

This vehicle has a staked master link drive
chain. If chain adjustment done upto
maximum level (Red Zone) than replace
chain. Visit your nearest Honda dealer
(6) Red Zone
(7) Arrow Mark
Lubrication and Cleaning:
This vehicle is equipped with seal type chain
hence proper care needs to be taken during its
cleaning and lubrication.
km (600 miles) or sooner if chain appears dry.
After inspecting the slack, clean the chain
and sprockets while rotating the rear wheel.
Use dry cloth with chain cleaner designed
specifically for O-ring chains, or neutral
detergent. Use a soft brush if the chain is dirty.
Honda Motorcycle & Scooter India Pvt. Ltd.
(6)
(7)
Lubricate every 1,000
After cleaning, wipe dry and lubricate with
drive chain lubricant designed specifically
for O-ring chains. If not available, use SAE
80 or 90 gear oil.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such
as gasoline and benzene, abrasive cleaner,
chain cleaner or lubricant not designed
specifically for O-ring chains as these can
damage the rubber O-ring seals.
Avoid getting lubricant on the brakes or
tyres. Avoid applying excess chain lubricant
to prevent spray onto your clothes and the
vehicle.
Replacement chain:
Type: Endless O-ring
Size: 520, Link: 108
NOTICE
However for lubrication and cleaning, please
contact Honda authorized service center.
59
CBR 250R