Table of Contents
Advertisement
8
Central Heating
Changing the Time Phases of Time Programs
In the delivered condition, the day is split into 6 time phases.
You can also split the day into less than 6 time phases, for example:
Time phase 1: Operation with standard room temperature from 06:00 to 22:00 h and;
Time phase 2: Operation with reduced room temperature from 22:00 to 06:00 h
After entry, the last time phase is automatically assigned to time phase 6. The other time phases are
then disabled.
Enter a start time, stop time and a room temperature for each active time phase ("Comfort", "Eco",
"Reduced") (see example).
You can select time phases for several days (day groups) or for individual days:
"MO - SU" for the same time phases on every day of the week
"MO - FR" for the same time phases on Monday to Friday
"SA - SU" for the same time phases on Saturday and Sunday
"SINGLE DAY" for different time phases on individual days
Note: Settings for individual days take priority over settings for several days.
1. Open the flap
2. Press
twice
3. Use
to select "Settings"
4. Confirm with OK
to select "Programs"
5. Use
6. Confirm with OK
7. Use
to select the program you want to
change (e.g. "Prog 1").
8. Confirm with OK
9. Use
to select "Set"
10. Confirm with OK
11. Use
to select the required group of days/
single day
Deactivating Time Phases
To deactivate a time phase, set the same value for the start and stop time.
Copying Time Programs
You can copy time programs, for example if you want to create a new time program based on an
existing one with only minor differences.
1. Open the flap
2. Press
twice
3. Use
to select "Settings"
4. Confirm with OK
5. Use
to select "Programs"
6. Confirm with OK
7. Use
to select the program you want to
change (e.g. "Prog 1").
12. Confirm with OK
13. Use
to select the required time phase, or
first the required day
14. Use
to set the required start time, stop
time and room temperature (e.g. "Reduced")
in succession.
15. Confirm each respectively with OK
16. Proceed as described in points 11 to 13 to set
further time phases.
Note: If the settings create gaps between the
time phases, these are closed automatically by
extending the preceding time phase.
1. Confirm with OK
2. Use
to select "Copy from"
3. Confirm with OK
4. Use
to select the program you want to
copy
5. Confirm with OK
6. Use
to select "Set" to make the changes
Hide quick links:
Advertisement
Table of Contents
