Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Sand Pro 2040Z Operator's Manual

Specifications

Note:
Specifications and design are subject to change without notice.
Weight
Width
Length
Height
Wheelbase
* with 4 weights, empty fuel tank, and no operator
** with the attachment and weights, empty fuel tank, and no operator

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or Distributor or
go to www.Exmark.com for a list of all approved
attachments and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro
delivers replacement parts designed to the exact
engineering specification of our equipment. For peace
of mind, insist on Toro genuine parts.
Machine only With flex tooth rake
399 kg (880 lb)* 417 kg (920 lb)**
147 cm (58 inches) 213 cm (84 inches)
186 cm (73.3 inches) 226 cm (89.0 inches)
With nail drag
439 kg (970 lb)**
182 cm (71.5 inches)
215 cm (84.8 inches)
185 cm (73 inches)
147 cm (58 inches)
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Park the machine on a level surface; engage the
parking brake, shut off the engine, remove the key,
and wait for all movement to stop before leaving
the machine.
•
Know how to stop the machine and engine quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before operating, always inspect the machine
to ensure that the components and fasteners
are in good working condition. Replace worn or
damaged components and fasteners.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
16
With nail drag and
finish mat
445 kg (980 lb)**
198 cm (78 inches)
297 cm (117 inches)