External decontamination
The applicability of the decontamination method and the selection of the appropriate
NOTICE
disinfectants have to be ensured by the user.
Prior to decontamination clean surfaces with a damp cloth if necessary. Use water or
a mild detergent as cleaning agent.
Prior to cleaning and/or decontamination separte BVC control / G and BVC
professional / G from mains.
Prior to restarting allow the device to dry completely.
A wiping and spray disinfection is possible by using a ethanol based surface disinfectant (e.g., Pursept
A, manufacturer: Merz GmbH & Co. KGaA, Frankfurt/Main, Germany).
Comply with use and safety instructions of the manufacturer!
NOTICE
+ For information about the compatibility with the materials, ask the manufacturer
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
page 8 of 27
of the disinfectant.
surface disinfectant on
ethanol basis