Decontamination Of The Vacuum Pump - vacuubrand BVC basic Manual

Hide thumbs Also See for BVC basic:

Table of Contents

Decontamination of the vacuum pump

only BVC control / G and BVC professional / G

NOTICE

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully

the validity of this document with respect to his product. 25/11/2013 // 999281

The applicability of the decontamination method and the selection of the ap-

propriate disinfectant have to be ensured by the user.

The vacuum pump of the BVC may contaminated due to operation. The protective

filter with a pore size of 0.2 µm does not avoid safely a contamination of the vacuum

pump in all cases.

Also in case of a defect of the filter or operation of the BVC without filter pathogenic

germs (e. g., bacteria, viruses, prions, fungi) may enter the pump.

A decontamination of the vacuum pump is possible in the following ways:

Gassing of the interior.

Disassambling the pump parts and insertion of the parts in a disinfectant solution

or by autoclaving of the contaminated parts.

page 13 of 27

Table of Contents

Bvc basic gBvc control gBvc professional Bvc professional g Vhc proBvc control