Zacuto Axis Mini Instructions

Z
Axis Mini
The Axis Mini is the
most adjustable ENG
style mount for rosette
mounted EVFs, giving
you full 360º motion
with four adjustment
points. It is compatible
with both rosette mount
EVF's like the Zacuto
Gratical or 1/4"-20
mounted EVF's like the
original Zacuto EVF.
It's single bone arm with
an extension range of 3"
and 2 pivot points with
tension locks. It has
extensive articulation for
use with a wide variety
of cameras, both
shoulder mounted in a
Next Generation Recoil
or in tripod operating
position.
The Axis Mini for Sony FS7
includes a Z-Mount
Zwivel 2, which attaches
to the 15mm rod on the
FS7. The Sony monitor
is secured to the rosette
mount adapter.
?
Check out our
tutorial videos
at zacuto.com
Parts and Features
* Not all items below are
included with each Axis Mini.
1 Axis Mini
3" Mounting Rod
1
Tightening Knobs
3
EVF Rosette Mount
1
Rosette for Sony EVF's
Rosette
1
4 Rosette Screws
Opperating the Axis Mini
Loosen this knob to adjust
the length of the Axis Mini.
Assembling Axis Mini to Quad Rail and EVF's
Assemble Axis Mini and Quad Rail to Recoil Handle as shown below.
Adjust rig to fit comfortably to user's eye.
Mount EVF's (Gratical shown to the right)
directly to Axis Mini's Rosette Mount.
Adjust rig to fit comfortably to user's eye.
Quad Rail for Screw Mounted EVF's
1
Zwivel 2 for Sony FS7
Ratcheting Levers
2
15mm Rod Ports
2
Loosen this knob to adjust
the lower rotation.
Quad Rail
1
1/4"-20 EVF Mount
1
FS7 Rosette
Mount Adapter
Loosen this knob to adjust
the upper rotation.
Turn knob to
tighten 1/4"-20
screw into quad
rail rosette.