Hpe5022_Ber_Setupchannelicregistersweep - Agilent Technologies E5022B Programming Manual

Function Reference
Channel IC Register Sweep Measurement

hpe5022_BER_setupChannelIcRegisterSweep

C Syntax ViStatus hpe5022_BER_setupChannelIcRegisterSweep(ViSession id, ViInt16
seqType, ViInt32 addr, ViInt32 upperBitPos, ViInt32 lowerBitPos, ViInt16 points,
ViInt32 reg_list[], ViPObject testHndl);
Visual Basic hpe5022_BER_setupChannelIcRegisterSweep(ByVal id As Long, ByVal seqType
Syntax As Integer, ByVal addr As Long, ByVal upperBitPos As Long, ByVal lowerBitPos
As Long, ByVal points As Integer, ByRef reg_list As Long, ByRef testHndl As
Long) As Long
Description
This function assigns the Channel IC Register Sweep measurement sequence then
returns a test identifier. See the
"hpe5022_BER_measureChannelIcRegisterSweep" function for details of the
sequence. This function does not execute the measurement. Measurement is
executed by the "hpe5022_measure" function with the test identifier specified in
this function.
The "hpe5022_BER_channelIcRegisterSweepData_Q" function returns the
measurement result.
Parameters • id
• seqType
• addr
• upperBitPos
224
Description Specifies the system identifier. This is given by the
"hpe5022_init" function.
Direction IN
Description Selects the sequence type of the channel IC register sweep.
Direction IN
Values Same as 'seqType' parameter in the
"hpe5022_BER_measureChannelIcRegisterSweep"
function.
Description Specifies the channel IC register address.
Direction IN
Values Same as 'addr' parameter in the
"hpe5022_BER_measureChannelIcRegisterSweep"
function.
Description Specifies the channel IC register's upper bit position.
Direction IN
Values Same as 'upperBitPos' parameter in the
"hpe5022_BER_measureChannelIcRegisterSweep"
Chapter 3