Assembly Instructions - Winco CCM-28 Operating Instructions Manual

Assembly Instructions - Cotton Candy Machine with Cart
MODEL: CCM-28M
CONTENTS
1 x Cotton Candy Machine Body
1 x Working Platform
1. Connect the two long poles with a cross brace (short pole) and
secure with long screws [M5x30mm] on both sides. Repeat this step
when connecting the cross braces (short Poles) to the axle poles.
2. Once the frame has been put together, slide the axle to the axle
poles and the wheel assembly.
Note: Check tired pressure before installing. Tire pressure
should be 55psi (379kpa).
3. With the frame assembly complete, place the cotton candy
machine body onto the frame and secure with screws [M4x12mm].
4. Attach both platforms to the cotton candy machine body using
small screws [M5x8mm] on each side.
Note: When mounting the platform, please be sure to install
the handle platform on the opposite side as the wheels.
5. Attach the handle to the handle brackets and secure to the handle
platform with countersink screws [M5x16mm] and lock in place
using the nuts [M5].
6. Place the floss pan on top of the cart and align the four L brackets
with the latches on the body and lock latches.
7. Make sure everything is secure and leveled. You are now on your
way to making delicious cotton candy.
1 x Collection Bowl
2 x Spoked Wheels
2 x Jam Nuts
8 x Srews
1 x Handle Platform [M4x12mm]
2 x Long Square Poles
2 x Axle Square Poles
3 x Short Square Poles
1 x Axle
1 x Handle
2 x Axel Washers 4 x Nuts [M5]
8 x Screws 4 x Countersink Screws
[M5x8mm] [M5x16mm]
2 x Handle Brackets
1 x Power Cord
1 x Sugar Spoon
1 x Spare Motor Belt
6 x Long Screws
[M5x30mm]
9