Fine Tuning - Indiana Line Arbour Series Installation And Use Manual

SPEAKER LINKING
Link the speakers to the amplifier, keeping the polarities. In the
event of wrong phase (opposite polarity) can reduce the
performances of the audio system.
Usually the positive is marked with the red colour and/or the
"+" sign, the negative with the black colour and/or the "-" sign.
Use right gauge cables, as on table.

FINE TUNING

Before fine tuning, please check that all the connections in the
installation are correct and the polarities too.
Follow the instruction manual of your Home Cinema amplifier
to adjust the speaker levels and/or further controls. By using
the 3.06 speakers, set your amplifier on "small speaker".
To locate the position supplying the best performances,
try to move the speakers inside your listening room,
even small differences can supply important acoustical
changes.
As well, try to rotate the speakers to find the position offering
the right acoustical scene.
RUNNING-IN
The sound of all speakers improves with the time: the better
performances can be matched just after several hours of
listening.
AFTERCARE
Usually, the cabinet only requires dusting; if needed, just use
at damp cleaning cloth. The protection grille fabric may be
cleaned with a normal clothes brush, while the grille is detached
from the cabinet. Do NOT touch the loudspeakers, especially
the tweeter, as damage may easily result.
13