■ HIOS Digital Torque Meter controls
■ Functions
Control
Power switch【POWER】
Reset switch【RESET】
Display
Unit selector【UNIT】
Measuring mode selector
【MODE】
AC connector
Analog data output
【ANALOG OUT】
Digital data output
【DATA OUT】
DIP switch
Torque set switch A【SET】
Memory function toggle switch
【M_SET】
Torque set switch B【▲】
Max load warning tone
on/off switch【BZ】
Memory clear switch【M_CR】 Deletes data in memory.
Average measurement
mode switch【AVE】
Adapter socket
1
*
Please push the power switch and detach it immediately until a buzzersounds.
2
*
Statistical Process Control (SPC) uses statistical techniques to monitor variations in manufacturing processes for use in quality control.
Button switch. The LED lights when the power is on. *
The power is automatically turned off when the instrument is not operated (or torque
load is less than 10) for a period of 10 minutes.
Used to return the display to zero or print out data.
Measuring unit display
Switches between one of the following combinations of torque measurement units,
depending on which combination the purchaser ordered: N
N
mkgf
cm
PEAK:
Freezes display at peak torque value. (Press reset to cancel)
TRACK: Displays current torque value.
F.PEAK: Freezes display at fi rst peak torque value.
For battery charger.
Port for analog voltage data output.
Press reset to output measurement data. This functions makes it possible to use the
instrument in statistical process control systems.*
For setting auto reset timer and turning data output on ("P.ON" LED indicates "on" setting).
Sets maximum torque load at which warning tone will sound
The LED lights when the memory function is on.
Sets the torque level at which the warning tone sounds.
The LED lights when this function is on.
When average measurement mode is on, the LED lights and the torque measure-
ment average values are displayed.
For connecting of torque tool, using a HIOS Fidaptor or other type of adapter.
- 4 -
Function
1
Model
N
m
N
HP-1
—
HP-10
0.000
HP-100
0.00
2
cm
N
mm
0.00
0.0
0.0
—
0
—
mlbf
in, N
mN
cm,