Hazards Caused By Repetitive Movements; Hazards Caused By Accessories; Hazards In The Workplace - Parkside PDMFW 15 A1 Translation Of The Original Instructions

■ Use personal protective equipment . Always
wear eye protection . Wearing personal pro-
tective equipment such as protective gloves,
non-slip safety shoes or hearing protection,
depending on the type and use of the power
tool reduces the risk of personal injuries and it
is recommended .
■ Wear a safety helmet for overhead work .
■ Do not try to brake the saw blades by applying
lateral counterpressure .
■ Torn or deformed saw blades may not be used .
■ Ensure that the saw blades are fitted properly .
■ Sparks must be diverted safely .
■ Ensure that no hazard is caused by sparks cre-
ated during use . Explosive or flammable dusts
can be generated when processing certain
materials . There is a risk of explosion or fire .
Hazards caused by repetitive move-
ments
■ Users of the compressed air tool may experience
unpleasant sensations in their hands, arms,
shoulders, neck area or other body parts .
■ Assume a comfortable position when working
with the compressed air tool, pay attention to
safe footing and avoid unfavourable positions
or such that make it difficult to keep your bal-
ance . During work over longer periods, the
operator should change posture regularly to
avoid discomfort and fatigue .
■ If the operator notices symptoms such as persis-
tent discomfort, throbbing, pain, tingling, burning
or stiffness, these warning indications should not
be ignored . The operator should consult a quali-
fied medical doctor .
PDMFW 15 A1

Hazards caused by accessories

■ Separate the compressed air tool from the com-
pressed air supply before replacing the attach-
ment or accessory .
■ Only use accessories that are intended for this
appliance and comply with the requirements
and specifications listed in these operating
instructions .
■ Avoid direct contact with the accessory tool
during and after use because it may be hot or
have sharp edges .
Observe the following guidelines:
■ Only use tools that are specifically made for
use with this appliance .
■ Do not use cutting discs or any other cutting
tools (other than the saw blades supplied) with
this appliance .
■ Ensure that the maximum operating speed of
the tool is higher than that of the machine .
■ Self-adhesive grinding discs must be applied
concentrically on the mounting plate .

Hazards in the workplace

■ Slipping, tripping up and falling are the main
causes of injuries in the workplace . Watch out
for surfaces that may have become slippery
from the use of the compressed air tool and
tripping hazards caused by the air hose .
■ Proceed with caution in new surroundings .
Hidden hazards caused by power or other
supply lines may be present .
■ This compressed air tool is not suitable for use
in explosive atmospheres and is not insulated
against contact with power sources .
■ Make sure (e .g . by using a metal detector) that
there are no hidden power, water or gas lines
in the location where you are working .
GB │ IE │ NI │ 5 ■