Table of Contents
Advertisement
Using Conventional TV Features (continued)
CHANNEL FIX
2-6: When the cable box is connected to the VHF/UHF input, you can fix the TV's
input to one of the channels between 2 and 6. Press DBS/CABLE (FUNCTION)
Locks selection of
and then CH +/– to change the cable box channels.
your projection
AUX 2-6: Use this when a cable box is connected to AUX, and a cable or antenna
TV's input when
is connected to VHF/UHF.
used in conjunction
VIDEO 1: Use this when you have connected external video equipment (e.g. AV
with external
receiver) and you want the projection TV's input fixed to it.
equipment such as
OFF: When you want to switch CHANNEL FIX off.
a cable box, AV
If the projection TV is in the AUX mode when you turn CHANNEL FIX off, press
receiver, etc.
ANT to return to UHF input mode.
TIMER settings are erased when CHANNEL FIX is set.
56
Note:
• You cannot change channels with the TV's
tuner when you set CHANNEL FIX. If
you want to use the TV's tuner while
fixing the TV's input to VIDEO 1, use the
SET UP menu to set SELECT OUT to TV
OUT. (see "SELECT OUT" on page 60)
Advertisement
Table of Contents
