Specifications - Sony KWP 65HD1 Operating Instructions Manual

Sony operating instruction projection hdtv kwp-65hd1
Hide thumbs Also See for KWP 65HD1:
Table of Contents

Advertisement

Specifications

Projection system
3 picture tubes, 3 lenses, horizontal in-line system
Picture tube
7-inch high-brightness monochrome tubes (6.3 raster
size), with optical coupling and liquid cooling
system
Projection lenses
High performance, large diameter hybrid lens F1.05
Television system
American TV standard
Channel coverage
DTV: 2–69/VHF: 2–13/UHF: 14 –69/CATV: 1 – 125
Antenna
75 ohm external terminal for VHF/UHF
Screen size (measured diagonally)
65 inches
Inputs/outputs on the upper panel
VIDEO 1/3 IN
VIDEO 2 INPUT
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced,
sync negative
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
VIDEO 4 IN
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced,
sync negative
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
Y: 1 Vp-p, 75 ohms, sync negative
P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
78
VIDEO 5 (HD) IN: Maximum scanning rate 1080i
Y: 1 Vp-p, 75 ohms, negative or tri-level sync
P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
or
G: 0.7 Vp-p
B: 0.7 Vp-p
R: 0.7 Vp-p
HD: 0.5–5 Vp-p, 2.2 kilohms
VD: 0.6–5 Vp-p, 2.2 kilohms
Note:
The VIDEO 5 (HD) IN jacks are not compatible with a
computer's 5BNC (R/G/B/HD/VD) video output
connectors.
AUDIO (phono jacks): 500 mVrms (100% modulation),
Impedance: 47 kilohms
SELECT OUT
VIDEO (phono jack): 1 Vp-p, 75-ohms unbalanced,
sync negative
AUDIO (phono jacks): 470 mVrms (100% modulation),
Impedance: 4.7 kilohms
AUDIO (VAR) OUT (phono jacks): 950 mVrms (100%
modulation)
AUDIO (FIX) OUT (phono jacks): 500 mVrms (100%
modulation)
Inputs/outputs on the lower pznel
VIDEO 1/2 OUT
S VIDEO OUT (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jacks): 1 Vp-p, 75-ohms unbalanced,
sync negative
AUDIO (phono jacks): 470 mVrms (100% modulation),
Impedance: 4.7 kilohms
VIDEO 3 OUT
Analog RGB/Component (phono jacks)
Y: 1.0 Vp-p, 75 ohms, sync negative
P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
VIDEO 4 OUT
R/G/B: 0.7 Vp-p, 75 ohms
HD SYNC: 3 Vp-p, positive
VD SYNC: 3 Vp-p, positive
DOLBY DIGITAL OUTPUT (OPTICAL) (optical output
connector): –18 dBm, wave length: 660 nm
S-LINK: minijacks
CONTROL S IN/OUT: minijacks
Speaker
Front (Tweeter): 70 mm (2")
2
Front (Super Tweeter): 30 mm (1
Front (Woofer): 130 mm (5")
2
Front (Center): 100 mm (4")
2
Rear: 70 mm (2
3
/
")
4
4
Speaker output
Front: 20 W
2
Center: 20 W
1
Rear: 10 W 2
Power requirement
120 V AC, 60 Hz
Power consumption
In use (Max.): 375 W
In standby: 3.4 W
Dimensions (W/H/D)
5
1,767
1,570
738 mm (69
/
61
8
Mass
217 kg (478 lbs 6 oz)
Supplied accessories
Remote control RM-Y904 (1)
Batteries (2) size AA (R6)
Rear speakers (2)
Speaker cords (2)
Optional accessories
Connecting cables
RK-G34, RK-74A, RKG-69HG, VMC-10HG,
VMC-720M, VMC-810S/820S, YC-15V/30V, Optical
digital cable
U/V mixer EAC-66
Design and specifications are subject to change
without notice.
1
/
") 2
4
7
1
/
29
/
inches)
8
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwp-65hd1

Table of Contents