Table of Contents
Advertisement
Using the Setup Menu
Channel Setup
Auto Program
Caption Vision
DTV Auto Add
VTR Recording
Name and Logo
Skip/Add
Language
Time Zone
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Setup Menu Selection" on page 32.
Note:
• If there are no DTV channels saved in
channel memory (no DTV channels found
during "Auto Program" or "DTV Auto
Add"), the "Name & Logo" and "Skip/
Add" features in the Setup Menu cannot
be accessed.
Channel Setup
Auto Program: Select to scan and preset digital channels automatically. Before
"Auto Program" process, a dialog box pops up with the message "Are you sure
Basic channel and
you want to clear your existing channel list?" Move the joystick left or right to
display options
select OK, and press
and the projection TV starts scanning and presetting digital channels
automatically. When all the receivable channels are stored, the lowest channel
is displayed and the tuning indicator disappears.
Note:
• If you currently have a list of programmed channels, or "Name and Logo" or
"Skip/Add" setting, they will be erased when you perform "Auto Program."
DTV Auto Add: Select to preset additional digital channels as they become
available without erasing original channels (after you use Auto Program).
During the "DTV Auto Add" process, a tuning indicator appears and the
projection TV starts scanning and adding new digital channels. When scanning
is complete, the indicator disappears and the current channel re-appears.
Name and Logo: Select to add or change the station
name and logo.
When selected, a dialog box pops up.
1 Press CH +/– to select the desired channel.
2 Move the joystick left or right to select the station
name and the corresponding logo.
3 Move the joystick up or down—and then left or right—
to select OK, and press
To clear the dialog box without changing the name and logo for the current
channel, move the joystick up or down—and then left or right—to select
"Cancel," and press
to activate "Auto Program." A tuning indicator appears
.
.
Dialog box
Name and Logo
Channel 30
FOX
FOX
Press CH+/– to change channels.
Press " " to toggle Name/Logo.
OK
Cancel
(continued)
33
Advertisement
Table of Contents
