Table of Contents
Advertisement
User Guide
1.8.
Environmental & Certifications
1.8.1.
Environmental Specifications
The environmental specification for both operating and storage conditions are defined in the table
below.
Table 4.
AirPrime HL7519 Environmental Specifications
Conditions
Operating Class A
Operating Class B
Storage
Class A is defined as the operating temperature ranges that the device:
Shall exhibit normal function during and after environmental exposure.
Shall meet the minimum requirements of 3GPP or appropriate wireless standards.
Class B is defined as the operating temperature ranges that the device:
Shall remain fully functional during and after environmental exposure
Shall exhibit the ability to establish an SMS or DATA call (emergency call) at all times even
when one or more environmental constraint exceeds the specified tolerance.
Unless otherwise stated, full performance should return to normal after the excessive
constraint(s) have been removed.
1.8.2.
Regulatory
The AirPrime HL7519 is compliant with FCC and IC regulations.
FCC and IC compliance will be reflected on the AirPrime HL7519 label.
Table 5.
Regulation Compliance
Document
FCC Part 22, 24, 27
1.8.3.
RoHS Directive Compliant
The AirPrime HL7519 modules are compliant with RoHS Directive 2011/65/EU which sets limits for
the use of certain restricted hazardous substances. This directive states that "from 1st July 2006, new
electrical and electronic equipment put on the market does not contain lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE)".
TBC
Current Version
NA
Rev 1.0
Range
-30°C to +70°C
-40°C to +85°C
-40°C to +85°C
Description
Federal Communications Commission
July 28, 2015
Introduction
13
Advertisement
Table of Contents
