Cub Cadet CC924HT Operator's Manual page 12

Oil inlet
BlADES
1. Please replace the blades if damaged or
worn seriously.
2. Please use the sharpener or file to grind
the cutting edges, referring to the angle in
the below picture.
3. Clean the blades after grinding and apply
the grease on the edges.
10° 10°
REGULAR CHECK LIST
ITEM
Check the bolt and nut,tighten up if necessary
Check for gas leak
Check and clean air cleaner
Check the cooling air intake port,cooling
fins,around muffler
Check and clean spark plug
Check and clean fuel filter
Remove carbon deposits on muffler and cylinder
Clean spark arrester
Replace spark plug
Replace fuel piping (fuel pipe,grommet)
Items with must be performed with proper tools,please do it with assistance of professionals
or authorized dealer.
45°
45°
INTERVAL
ANTI-VIBRATION SYSTEM
WARNING
The damaged anti-vibration system may
cause the vibration or breakage of any parts.
1. Check periodically if the springs are deformed
or out of place.
2. Please use an authorized service dealer to
repair any damages.
BEFORE OPERATION
DAILY INSPECT
-12-
EVERY EVERY EVERY
50 HRS 100 HRS 2 YRS