Emg-Usb2 Maintenance And Storage - OT Bioelettronica EMG-USB2 User Manual

10. EMG-USB2 MAINTENANCE AND STORAGE

EMG-USB2 has to be used in the following ambient conditions:
Temperature:
Maximum relative humidity:
Atmospheric pressure:
It is recommended to turn off the EMG-USB2 at the end of each measurement session, and to
remove all the cables and connections. The EMG-USB2 should be stored with all the enclosed
accessories on a safe desk far from all the situations listed in the section
EMG-USB2 should be stored in the following ambient conditions:
Temperature:
Maximum relative humidity:
Atmospheric pressure:
Cleaning: use only a dry cloth to clean the device.
It is recommended to plan a device check every 24 months with the manufacturer. The EMG-USB2
should be repaired by the manufacturer only. Every repair executed by unauthorized personnel will
be considered as a device violation voids the manufacturer's warranty.
Disposal
The device and the accessories should be disposed in compliance with the relative standards in
special equipped areas or with special waste.
from 0°C to +40°C
75%
from 700 hPa to 1060 hPa
from –20°C to +40°C
75%
from 700 hPa to 1060 hPa
pag. 28/31
EMG-USB2 User manual
Warnings.
v.2.0