Troubleshooting - OT Bioelettronica EMG-USB2 User Manual

9. TROUBLESHOOTING

This section describes the most common problems that may be found by EMG-USB2 users, with
some suggestions to solve them.
For problems not described in this section contact the Technical Support Service of OT
Bioelettronica.
Problem
The electromyograph does not
turn on
The instrument turns on, but the
characters are not shown properly
on the display
TAB. 7: Troubleshooting of the general problem that can occur using the EMG-USB2
GENERAL PROBLEMS
Possible cause
Power supply switched off
Power supply cable is not inserted
properly in the amplifier or into the wall
socket
Breakdown of the fuses
Ambient temperature is too low
pag. 27/31
EMG-USB2 User manual
Solution
I
Turn to " " the power supply switch.
Check the power supply cable and the socket
connection
Contact the Technical Support Service of OT
Bioelettronica
Wait that the electromyograph warms up
v.2.0