Maintenance And Storage - OT Bioelettronica FORZA User Manual

OT Bioelettronica snc
9. FORZA MAINTENANCE AND STORAGE
Forza has to be used, transported and stored in the following conditions:
Temperature:
Maximum relative humidity:
Atmospheric pressure:
It is recommended to turn off the Forza at the end of every session.
The Forza should be stored with all the enclosed accessories on a safe place far from all
conditions described in the Warnings section of this manual. The Forza does not need any
particular maintenance procedure to work. To maintain the battery efficiency, recharge the
device before every use and check regularly the efficiency status of the battery.
If during the use and after the battery charging the battery lasts less than 1 hour,
contact the manufacturer to check the electrical source itself.
Cleaning the device: At the end of every use, please clean the Forza with a clean cloth.

Do not clean the Forza using acetone, ether, freon, oil products or any other
solvent;
Do not use soap or water on the connectors pin contacts.

Do not clean the Forza or its cables with water, in autoclave or with steam
cleaning.
WARNING: clean electrodes adapter cable only with hospital disinfectants before
every use to avoid microbial contamination between patients and healthcare professionals.
v1.0 – Ed. 05/2015
User Manual
from 10°C to +40°C
from 30% to 75%
from 700 hPa to 1060 hPa
Pag. 15/19