Staging Speed - Danfoss MCO 101 Manual

6 How to Program
6

6.1.5 Staging Speed, 27-3*

Parameters for configuring Master/Follower control response.
6.1.6 Auto-tune Staging Speeds, 27-30 (To be included in future versions!)
27-30 Auto-tune Staging Speeds
Option:
[0] Disabled
[1] * Enabled
27-31 Stage On Speed (RPM)
Range:
P4-13* [par. 4-11 – par. 4-13]
6-6
Function:
When enabled, the stage on and off speeds will continually be auto-tuned during operation. The
settings will be optimized in order to ensure high performance and low energy consumption. If
disabled, the speeds can be set manually.
Function:
To be used if RPM is chosen.
If the lead pump is operating above Stage On Speed for the time specified in Staging Delay (par.
27-23), and a variable speed pump is available, it will be turned on.
®
MI.38.C2.22 - VLT is a registered Danfoss trademark
Extended and Advanced Cascade Controller
Option