Danfoss MCO 101 Manual page 4

1 Safety and precautions
1.1.4 Software Version
1
This Instruction Manual can be used with all Extended Cascade Controller options with software version 1.24.
NOTE!
MCO 101 is software supported as of version 1.05 onwards and MCO 102 as of version 1.24.
When reading through this instruction manual, you will come across various symbols that require special attention.
The symbols used are the following:
Indicates a general warning.
NOTE!
Indicates something to be noted by the reader.
Indicates a high-voltage warning.
1-2
Extended Cascade Controller Option for
VLT AQUA Drive FC 200
Instruction Manual
Software version: 1.24
®
MI.38.C2.22 - VLT is a registered Danfoss trademark
Extended and Advanced Cascade Controller
Option