Factory Set; Resetting The User Memory To The Initial Factory Settings; Power On Auto Factory Set - Yamaha Motif XS Series Service Manual

FACTORY SET

Both the "Factory Set" in this section and the "T24: Factory Set" in the test program can be used to reset to factory
default.
When the factory settings are restored, all the Voice, Performance, Song, Pattern, and system settings in the
Utility mode you created will be erased. Make sure you are not overwriting any important data. Be sure to save all
important data to your USB storage device before executing this procedure (page 165).

Resetting the User Memory to the Initial Factory Settings

The original factory settings of this synthesizer's User Memory can be restored as follows.
1
Press the [UTILITY] button then the [JOB] button to call up the Factory Set display for entering the
Utility Job mode.
In the Utility Job mode, you can restore this synthesizer's User memory to the factory default settings (Factory Set).
2
Press the [ENTER] button.
The display prompts you for confi rmation. Press the [DEC/NO] button to cancel the Load operation.
3
Press the [INC/YES] button to execute the Factory Set.
After the Factory Set has been completed, a "Completed" message appears and operation returns to the original
display.
For Factory Set operations that take longer to process, you will see the message "Now executing Factory Set..."
during processing. While such a message is shown on the display, never attempt to turn off the power while data
is being written to Flash ROM. Turning the power off in this state results in loss of all user data and may cause the
system to freeze (due to corruption of data in the Flash ROM). This means that this synthesizer may not be able to
start up properly, even when turning the power on next time.
When this parameter is set to "on," (Fig. 1– q) in the Factory Set display turning the power on will restore the User memory
to the factory default settings and load the demo songs and demo patterns. Normally, this should be set to "off."
Settings: on, off
✔
When the Power On Auto Factory Set parameter is set to "on," turning the power off erases all the User memory
data such as Voice, Performance, Song, Pattern and Utility settings.

Power On Auto Factory Set

(Fig. 1)
MOTIF XS6/MOTIF XS7/MOTIF XS8
169