Panel Switch, Led Test - Yamaha Motif XS Series Service Manual

MOTIF XS6/MOTIF XS7/MOTIF XS8
(Knob notch mark should be within ± 30 degrees from the
bottom position when the contrast is adjusted with the [LCD
CONTRAST] volume for easy-to-recognize screen when
seeing straight into LCD.)
[Judgment indication]
None
[MIDI code output for judgment result]
None
[How to quit test]
• MANUAL MODE:
Press the [EXIT] button to quit the test and the same screen as
the [First indication] will appear indicating that a condition
waiting for test number is selected.
• MIDI MODE:
Send a test code for another test to complete the current test
and the test for the newly sent test code will be executed.
[Others]
None
T03: Panel Switch, LED
(Test Code: A00400)
[First indication]
TEST
03 : Panel SW
[Test contents]
Check that panel buttons work normally.
Compare the SW ON data from the EBUS controller and the
SW Name on the LCD. When identical, SWP51(DM: IC010,
011) plays sine wave and if the button has a corresponding
LED, the LED will light. Check that the LED works
normally and there is no irregularity in brightness.
[Test method]
Turn ON/OFF all the switches on the unit following the
indication on the LCD.
116
MOTIF XS Test Program
Press [ENTER]
TEST
03 : Panel SW
Press [ xxxxxxx
LED = [ yyyyyyy ]
xxxxxxx: Switch Name
yyyyyyy: LED color (Green, Orange, Red)
In normal condition, a sine wave will be produced when the
button is ON and the test for the next button will be selected.
If an unexpected code is sent (wrong switch is pressed), NG
will be shown and no sound will be played.
Then, if a correct code is received, the test for the next button
will be selected.
OK will be shown if all the buttons are normal.
The following is an order for checking the buttons.
The color of the LED that lights when the button is pressed is
shown after " , ". (G: Green, O: Orange, R: Red) Press the button
three times each for [SELECTED PART CONTROL],G,G,G
and [MULTI PART CONTROL],G,G,G.
[SELECTED PART CONTROL],G,G,G "
[MULTI PART CONTROL],G,G,G "
[ASSIGNABLE FUNCTION1],G "
[ASSIGNABLE FUNCTION2],G "
[REMOTE ON/OFF],O " [ARPEGGIO ON/OFF],G "
[EFFECT INSERTION],G " [BYPASS SYSTEM],G "
[MASTER EFFECT],G " [OCTAVE DOWN],G "
[OCTAVE UP],G " [SEQ TRANSPORT U ] "
[SEQ TRANSPORT E ] " [SEQ TRANSPORT R ] "
[SEQ TRANSPORT S ],R " [SEQ TRANSPORT A ] "
[SEQ TRANSPORT W ],G " [SF1] " [SF2] " [SF3] " [SF4] "
[SF5] " [SF6] " [F1] " [F2] " [F3] " [F4] " [F5] " [F6] "
[DEC/NO] " [INC/YES] " [ < ] " [ B ] " [ M ] " [EXIT] " [ N ] "
[ENTER] " [VOICE],G " [PERFORM],G " [MASTER],O "
[SONG],G " [PATTERN],G " [SEQ SETUP],G "
[INTEGRATED SAMPLING],G " [MIXING],G " [FILE],G "
[UTILTY],G " [EDIT],G → [JOB] " [STORE] "
[COMMON EDIT],G " [PRE1],G " [PRE2],G " [PRE3],G "
[PRE4],G " [PRE5],G " [PRE6],G " [PRE7],G " [PRE8],G "
[USER1],G " [USER2],G " [USER3],G " [GM],G "
[GM DR],G " [PRE DR],G " [USER DR],G "
[ETHNIC],G " [A],G " [B],G " [C],G " [D],G " [E],G "
[F],G " [G],G " [H],G " [1],G " [2],G " [3],G " [4],G "
[5],G " [6],G " [7],G " [8],G " [9],G " [10],G " [11],G "
[ 1 2 ] , G " [ 1 3 ] , G " [ 1 4 ] , G " [ 1 5 ] , G " [ 1 6 ] , G "
[ P R O G R A M ] , O " [ C AT E G O RY S E A R C H ] , O "
[ P E R F O R M A N C E C O N T R O L ] , O " [ T R A C K ] , O "
[MUTE],O " [SOLO],O
MOTIF XS Test Program
]