When You're Done - Bissell 7920 SERIES User Manual

Perfect Pass
The Perfect Pass feature is designed to help you achieve the best
cleaning results when deep cleaning.
Apply smooth even strokes when deep cleaning your carpets. An
upright deep cleaner should not be used at the same speed as an
ordinary vacuum. That is too fast for optimum cleaning results.
The Perfect Pass indicator displays a red light which tells you if
you are in the range of Best Cleaning or if you are going Too
Fast. If you notice consistently that the indicator light is in the Too
Fast area, slow down until the light is in the Best Cleaning range.
This will ensure you are getting the best cleaning results.
TurboBrush
Unplug cleaner from the outlet before attaching TurboBrush. Attach
TurboBrush to the Flex Hose by pressing tool onto the grip/trigger
until button snaps into hole. Make certain tool is securely in place.
Move the TurboBrush switch to the "BRUSH" position.
1.
This activates the brush when the unit is running.
Place the tool directly on the soiled surface. Apply
2.
downward pressure on the tool and pull towards you
while pulling trigger to spray cleaning solution.
Release the spray trigger and move the switch to the
3.
"SUCTION" position. Vacuum the area until no more
cleaning solution can be removed.
Repeat steps 1-3 until no more dirt can be removed.
4.
Caution: Do not overwet.

When You're Done

Disconnect the TurboBrush from the Flex Hose by pushing
1.
down on the button lock and pulling straight off.
Once removed from the flex hose, the TurboBrush can
2.
be cleaned.
A) Move the switch to the "SUCTION" position
B) Rinse under running water.
C) Check spray nozzle for dirt. If necessary, clean with
D) Replace TurboBrush in its special storage
14
ug310-5829_7920K_405.indd 14 ug310-5829_7920K_405.indd 14
™
™
Assembly and Use
a soft bristle brush.
location on the handle front.
5/5/06 11:25:22 AM 5/5/06 11:25:22 AM