Bissell 7920 SERIES User Manual page 20

To Install the Replacement Pump Belt
With the unit still on its side, loop one end of the Replacement
1.
Pump Belt around the red pump pulley and then the other end
around the silver motor shaft (see illustration). Do not twist the
Replacement Pump Belt.
Re-install the "toothed" Brush Belt first onto the red pump pulley
2.
and then onto the "toothed" end of the brush (see illustration).
Re-install the brush into the base of unit.
3.
Place the black brush arm onto the brush and slide black
4.
brush arm into base of unit. The black brush arm and brush
should slide easily into original position (see illustration).
Re-install the red retainer plate and Phillips head screw
5.
(see illustration).
Using your finger, gently spin the Replacement Pump
6.
Belt on the silver motor shaft. If assembled correctly, the
Replacement Pump Belt should rotate freely around the silver
motor shaft and drive pulley without obstruction. The brush
should also rotate freely when the silver motor shaft is turned.
Turn the machine right side up and replace the
7.
Tank-In-Tank, SmartMix Bottle and Belt Access Door
(see illustration).
Assembly is now complete.
8.
If you have any questions, or are having trouble installing
your Replacement Pump Belt, please call BISSELL Consumer
Services in the UK at 0870-225-0109 or in Australia at
1-800-811-183. For all other countries call our USA
Headquarters at 01-616-453-4451. Or visit the BISSELL
website: www.bissell.com.
20
ug310-5829_7920K_405.indd 20 ug310-5829_7920K_405.indd 20
1
2
4
5
6
7a
7b
5/5/06 11:25:26 AM 5/5/06 11:25:26 AM